Thanks for buying Card Reader! [Overview] Mobile Stream Card Reader allows to use Palm-powered handhelds as an ordinary USB/Bluetooth card reader for quick and easy file exchange. * Great USB transfer speed (up to 1200KB/s for reading and up to 1100KB/s for writing on most modern handhelds) * Background operation support * Ability to export multiple slots at the same time * Experimental Bluetooth FTP support * Small memory footprint (60KB) Note: background mode support is an EXPERIMENTAL feature. [Installation] Any previously installed versions should be removed before installing the new one. CardReader.prc has to be installed onto the handheld RAM. Installation onto SD Card, Memory Stick, Compact Flash card or internal Hard Drive is not supported. [Uninstall] To remove the Card Reader, use the "Delete" menu option of PalmOS Launcher. [Checkbox Options] "Force write protection" - this option, if checked, will export the storage card as write protected even if a hardware read-only lock is disabled. Cannot be toggled during an active USB mass storage session. "Try to connect on launching" - this option, if checked, will make the application attempt to connect to the PC host if the handheld is in the USB cradle or mini-USB cable is plugged in. "Enable power off if no I/O activity" - this HIGHLY EXPERIMENTAL option, if checked, will enable automatic power off if there is no read/write activity. It might help to prevent battery draining after a long copy operation without human control. "Permit backlight disabling" - this EXPERIMENTAL option, if checked, will turn off the display backlight if there is no user activity for one minute to save the battery power. This option is ignored if Card Reader works in background mode. [Bluetooth FTP notes] - Link is authenticated but not encrypted unless the peer requires it - Only one session is supported at once - Deleting a folder may fail if it is not empty - Incomplete file is not deleted if the PUT operation failed [Supported devices (USB mass storage)] palm Centro palm Treo 755p palm Treo 700p palm Treo 680 palm T|X palmOne Treo 650 palmOne Treo 600 palmOne Tungsten|T5 palmOne Tungsten|T3 palmOne Tungsten|T2 palmOne Tungsten|T palmOne Tungsten|E2 palmOne Tungsten|E palmOne Tungsten|C palmOne Zire 72 palmOne Zire 71 palmOne Zire 31 GSL Xplore M28 GSL Xplore M68 (branded as Hagenuk S200) GSL Xplore M70 GSL Xplore M98 QoolLabs/PiTech Qool QDA-700 Garmin iQue 3600 Garmin iQue 3200 Tapwave Zodiac 1 Tapwave Zodiac 2 Sony CLIE PEG-VZ90 Sony CLIE PEG-UX40 Sony CLIE PEG-UX50 Sony CLIE PEG-TH55 Sony CLIE PEG-NX60 Sony CLIE PEG-NX70 Sony CLIE PEG-NX73 Sony CLIE PEG-NX80 Sony CLIE PEG-NZ90 Sony CLIE PEG-TG50 Sony CLIE PEG-TJ25 Sony CLIE PEG-TJ35 Sony CLIE PEG-TJ27 Sony CLIE PEG-TJ37 [Supported devices (Bluetooth FTP)] Any PalmOS 5.x device with built-in Bluetooth module. [What is new in v1.09] - New option to force write protection; - Fix for the incomplete folder listing problem in Bluetooth FTP mode; - Italian and Portuguese translations of the application UI. [What is new in v1.08] - Send the correct USB serial number to support several simultaneously connected devices; - Official support for Palm Centro; - French translation of the application UI. [What is new in v1.07] - Preliminary support for the upcoming Palm devices; - Compatibility fix for TH55 when used with Mac OS X 10.4.10; - German translation of the application UI. [What is new in v1.06pl0] - Support for Treo 755p; - Per service auto enable setting; - Show the address of the remote Bluetooth device; - Fixes in the Bluetooth FTP server code; - Correctly show the size of the 4GB+ cards (USB mass storage protocol code was not affected); - Spanish and Russian translations for the application UI. [What is new in v1.06] - Support for GSL Xplore M70, Palm Tungsten|T and Tungsten|T2; - New relocatable PNO scheme to avoid the need of the self-allocated SHL$$Index value. [What is new in v1.05pl0] - Enable the USB mass storage mode automatically only if the cable is actually plugged in. [What is new in v1.05] - Experimental support for Bluetooth File Transfer Profile; - Official support for Treo 680; - Fix for another DMA buffer alignment defect that sometimes caused a flaky or slow connection on TH55, UX40/50 and VZ90. - Fix for a Sony UX40/UX50 hang on a safe disk removal in Windows. [What is new in v1.04] - Support for Qool QDA-700. [What is new in v1.03] - Official support for GSL Xplore M98; - Fix for Zodiac incompatibility with Mac OS X. [What is new in v1.02] - Fix for the "cannot connect after eject" problem on Mac OS X; - Workaround for a crash when BackupMan 2.03 is installed; - Automatic disconnect when the card is "ejected" in Mac OS X. [What is new in v1.01] - Support for Treo 700p; - Minor fix in the OMAP driver. [What is new in v1.0] - Support for Xplore M28; - Fixed a rare crash on Zire 72 and other PXA27x-based devices; - Fixed a crash with Pocket Tunes; - Improved stability in the background mode on PalmOS 5.2+ devices. [What is new in v0.98] - Exporting multiple slots at once on all supported devices; - Better transfer speed for Garmin iQue 3600/3200, Tapwave Zodiac; - Support for Treo 600, GSL Xplore M68; - Better fault tolerance to card or connection errors on most devices; - More reliable reading for PXA-based devices; - Fixed a random lock-up or a crash on connect for TH55, UX40/50, VZ90. [Support] Please report any problems/suggestions to support@mobile-stream.com