
-----------------------------------------------------------------
                       Palm(TM) Web Pro 3.0
                          Readme File
                         April 14, 2004
-----------------------------------------------------------------

Congratulations on your purchase of the Palm(TM) Web Pro browser.  This readme file contains important information about your Palm(TM) Web Pro browser.

We strongly recommend reviewing this entire document because it may contain
information otherwise not available in the handbook.

TABLE OF CONTENTS
=================

  INSTALLATION
 - Instructions
 - Upgrading from an earlier version of Palm Web Pro
 - Changes from previous releases
 - Handheld requirements
 

  APPLICATION NOTES
 - Proxyless browsing on low memory devices

  PALM WEB PRO 3.0 HANDBOOK (USER MANUAL)
 
  TECHNICAL SUPPORT INFORMATION 


INSTALLATION
============

Instructions
------------
Follow these steps to install Palm Web Pro 3.0:

Note: If you are currently using Palm Web Pro, first read the section below titled "Upgrading from an earlier version of Palm Web Pro."

1. If you are reading this, you have already extracted the PalmWebPro30.zip file using an unzip utility. Note the location of the directory/folder the file is extracted to. 
2. Launch Palm Desktop. Select the Quick Install icon. (Install Tool on older versions of the Palm desktop software)
3. Select the correct user name from the User list. 
4. Select the Add button. 
5. Locate the WebPro30.prc file in the directory/folder noted in Step 1 above and double-click on it (Or click once on the file name and then click on the Open button).
6. Repeat step 5 for the mathlib.prc and WebProCACerts.PDB files.
7. Select Done and then OK.  (Install Tool only, this step is unnecessary with the Palm Quick Install.)
8. During the next HotSync synchronization, the Web Pro 3.0 files will be installed. 

Note: You can select all files at the same time and click on Open.  While holding down the Ctrl button, click on each file to select all files.


Upgrading from an earlier version of Palm Web Pro
----------------------------------------------------------

If you are upgrading from an earlier version of Palm Web Pro, you can just install the new version on the device, and the old version will be overwritten. You do NOT need to delete the old version from the device.


1. If you are upgrading from Web Pro 1.x to Web Pro 3.0, your bookmarks, history and URL history are retained. But saved pages and browser cache is not retained.

2. If you are upgrading from Web Pro 2.0 to Web Pro 3.0, all your data such as bookmarks, history, URL history, saved pages and cache will be retained.


Changes from previous releases
------------------------------
- Dual mode capability -- proxyless and proxy mode
- Multiple layout options -- handheld view, normal view and full screen view
- One-handed operation using the 5-way navigator
- Launch browser with user-defined start page

For more details, please visit http://www.palmone.com/us/software/webpro30/


Handheld requirements
-------------------
Palm Web Pro 3.0 is supported on the following Palm(tm) handheld devices:
- Tungsten C
- Tungsten E
- Tungsten T
- Tungsten T2
- Tungsten T3
- Zire 71
- Treo 600


APPLICATION NOTES
=================

Proxyless browsing on low memory devices
----------------------------------------------
Palm Web Pro 3.0 allows you to browse the Internet with or without a proxy server. Palm hosts a proxy server which is configured to be the default server for Web Pro. The proxy helps compress the Internet content and optimizes it for your handheld.

Proxyless browsing requires more memory than proxy-based browsing. Some devices with lower memory such as Tungsten T, T2, Treo 600 and Zire 71 might give an error when you are trying to browse a large sized web page in proxyless mode. The error would be "Page too large." 

In that case, it would be better to switch the browser to proxy-mode and reload the page for better results. In order to switch to proxy-mode, click on the Menu bar and go to Options Menu. Choose Preferences --> Advanced --> Tap the check box which says "Set proxy". If the default proxy is not configured already, input the following values:
Proxy address: webpro.palm.com
Port number: 8827


PALM WEB PRO 3.0 HANDBOOK (USER MANUAL)
=======================================

For more detailed information about the product, you can download the Palm Web Pro 3.0 handbook from the support site

http://www.palmone.com/us/support/accessories/webpro30/


TECHNICAL SUPPORT INFORMATION
=============================
--- For help or questions regarding purchasing and downloading Palm Web Pro to your computer, contact Handango customer support.

Web site: 	www.handango.com

--- For help or questions regarding the Palm Web Pro application and its functionality, please contact Palm, Inc. customer support.

Palm, Inc.

Web site:      http://www.palmone.com/us/support/accessories/webpro30/



Copyright
=========

© 2003 Palm, Inc.  All rights reserved. HotSync and Palm OS are 
registered trademarks of Palm, Inc. Palm, the Palm logo and trade 
dress, and Tungsten are trademarks of Palm, Inc. All other brands are 
trademarks or registered trademarks of their respective owners.


